Home > Products > Motors Category > Parts & Accessories > Boat Parts > Propellers >

Turning Point Propellers 21431911 Le1/Le2-1319 Hustler Aluminum Right-Hand
Turning Point Propellers 21431911 Prop Hustler 3B Al 13.25X19 Rh




Condition :New

Price: $149.00
Sale Price: $93.91
Savings: $55.09
MPN : 21431911
UPC : 652480102301
Shipping From: Shipping from USA

Quantity in Stock:8

Order Now & Get it by:

Description Extended Information/Manuals

Turning Point Propellers 21431911 Hustler Propeller 13.25x19, 3-Blade Aluminum, RH Rotation (Standard)

Hustler® Aluminum 3 Blade Props for 40-150hp Engines with 4.25" Gearcases.
Boasting the same race-proven geometry as Turning Point's stainless steel propellers, Turning Point Hustler aluminum propellers resist blade flex to deliver both improved fuel economy and performance. Under acceleration, tuned exhaust vents in the prop barrel reduce water density around the blades to produce faster hole shots and higher horsepower.
  • Stainless steel performance at aluminum prices.

  • Prop blades resist flex for improved fuel economy and performance.

  • Tuned exhaust vents improve hole shot.

  • Squeeze casting adds strength that boosts performance.

  • Protected by five-step powder-coated finish.

  • Propellers fit Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.

  • Uses 500 series Installation/hub kits only-Sold separately.

  • See application chart for engine application information and required Installation/hub kit part numbers.

Turning Point Hustler aluminum props function just like Express stainless steel designs and run within 0.5MPH to 1MPH of each other most of the time. There are many reasons for this:
- Hustler props are produced from the same stainless steel geometry & drawing.
- Hustler is cast using the latest state-of-the-art squeeze casting technologies.
The competition does NOT use stainless steel blade geometry with no-blade-flex squeeze cast technology in their aluminum propellers. Competitive Die-Cast aluminum propellers significantly under perform when compared to stainless steel designs seen in the market.

The 3-Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. 4-Blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. 3-Blade props run better on pontoons, while 4-Blades and 3-Blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).

Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free